Driveway Cleaning

The process differs slightly from block paving to pattern imprinted concrete etc, the basic principles of driveway cleaning remain the same. We use an advanced rotary cleaning system on all drives, eliminating streaking and minimising mess and damage.

Stage one: Consists of surface preparation, removal of any plant pots, wheelie bins etc. All loose debris can then be swept clear. We lift any drainage channel grates, check the drains and remove any debris.

 

Stage two: The driveway is cleaned using a low pressure, high temperature, steam industrial rotary washer, this removes dirt buildup, moss, algae, weeds and most stains and marks.

 

Stage three: The driveway is then washed down thoroughly, all drainage channels and drains are checked and cleaned if necessary.

Stage four: Now the driveway has been cleaned of all weeds, dirt, moss etc, we check for tyre marks, oil and other stains which may not have been visible on first inspection. Any such staining that is found will be treated with the appropriate cleaning detergent and re-cleaned for complete removal. Finally all doors, windows & brick work are washed and wiped down , leaving the area in the condition it was found in.

 

Stage five: For monoblock driveways, kiln dried sand is applied to the driveway to fill the joints between the blocks and any excess is brushed away leaving the driveway looking new again.

 

Stage six: If required, the driveway is sealed with an acrylic sealer to prevent stains penetrating the surface and this helps to prevent weeds taking root on your freshly cleaned driveway.

 

Office Hours are;
Monday-Friday 8am-7pm
Saturday 8am till 1pm